Plumbing can be an exciting endeavor. No really, it can be. In terms of taking better care, doing your own plumbing repairs to save money is actually quite exciting. To start learning some basics as to how to make this work for you, please be sure to refer to the tips below.
If your pipes bang when you turn on the water, and all the pipes are anchored correctly, you should add some straps or cushion the pipes with a rubber blanket. There may be times when you will need to do both. Make sure that if you have copper pipes, you are not using galvanized straps.
If you have a clogged toilet with a low water level and a plunger isn’t doing the job, it’s time to try adding a bucket of lukewarm water to the toilet from a around three feet or higher. If the water goes down to a lower level again, then you should repeat the procedure.
Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.
Be sure that the dryer’s lint trap is clean. This can prevent various problems, including a fire. See to it that you look at the lint trap and find out if it has tears or holes in it that could cause lint to go inside your pipes. This could lead to clogs or other problems in the future.
Fix issues with low water pressure by cleaning sediment buildup out of your faucet’s aerator. The aerator should be removed and taken apart. Then, clean with a tiny brush swabbed in vinegar. Then all you need to do is rinse and reassemble the aerator before putting it back on the faucet. Clean the aerator, it might increase your water pressure.
Frozen pipes can lead to many problems, most of them expensive to fix. So you want to avoid that at all costs. To avoid frozen pipes, make sure the temperature in your home never drops below 55 degrees. Look for any air leaks around your pipes and make sure they’re sealed up.
Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.
When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn’t work, try a chemical drain cleaner.
So, now do you see why plumbing is such an exciting endeavor? Creating your own skills, learning to take care of your system, and being able to fix it yourself to save money is very exciting. The tips above should have created a good foundation for you to build upon and do your own plumbing jobs easily.